Genuine Original Transition Networks E-MCC-1600 16-Slot Media Conversion Center. The modular Transition Networks E-MCC-1600 16-Slot Media Conversion Center allows the network administrator to select from among Transition Networks Media Converter Slide-in-Modules, to install the Media Converter Slide-in-Modules in the Media Conversion Center chassis, and then to connect various network media, at a central wiring location, through the Media Converter Slide-in-Modules. If a Management Module is installed in the Media Conversion Center, the network administrator also can use a remote Network Management Station to monitor the status of the Media Conversion Center and of any installed Media Converter Slide-in-Modules.
This unit includes:
1 x Power Supply Module E-MCC-PS
5 x 100Base-FX 100Base-TX Module Card C/E-100BTX-FX-04
1 x 100Base-FL 100Base-T Module Card C/E-TBT-FRL-03
Model Number: E-MCC-1600
Specifications:
| Standards | IEEE 802.3u |
| Case Dimensions | 4.75" x 3.0" x 1.0" (119mm x 76mm x 25mm) |
| Environment | Temperature: 0-40°C (32° to 104° F )
Humidity 10-90%, non condensing
Altitude 0-10,000 feet |
| Status LEDs Straight-through Cable Configuration | Straight-through/crossover 100BASE-TX requirements are satisfied using the MDI/MDI-X switch with straight-through cable |
| CATEGORY 5 | Gauge24 to 22 AWG Attenuation 20 dB/1000’ @ 10 MHz Impedance 100 Ω±10% @ 10 MHz Maximum Cable Distance:100 meters (330 feet) |
100BASE-FX CABLE SPECIFICATIONS
SINGLE MODE | Fiber-optic Cable Recommended:9 µm single mode fiber Fiber-optic Transmitter Power: min: -15.0 dBm max: -8.0 dBm Fiber-optic Receiver Sensitivity: min: -32.5dBmmax: -8.0 dBmWavelength:1300nMBit error rate:≤10-9Maximum Cable Distance:20 kilometers |
| MULTIMODE | Fiber-optic Cable Recommended:62.5 / 125 µm multimode fiberOptional:100 / 140 µm multimode fiber85 / 125 m multimode fiber
50 / 125 m multimode fiber |
