| Brand | • SuperMicro |
| Model | • X8DTT-IBXF |
| Part Number | • MBD-X8DTT-IBXF-B |
| CPU Support | • Dual 1366-pin LGA Sockets
• Supports up to two Intel 64-bit Xeon processor(s) of the same type below:
• Intel XeonProcessor 5600 Series (Westmere)
• Intel XeonProcessor 5500 Series (Nehalem-EP) |
| Memory Capacity | • 12x 240-pin DIMM slots
• Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
• Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC / Non ECC Unbuffered memory
• Memory Mirroring supported |
| Memory Type | • 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | • 1GB, 2GB, 4GB , 8GB** , 16GB** |
| Memory Voltage | • 1.5 V / 1.35 V |
| Error Detection | • Corrects single-bit errors
• Detects double-bit errors (using ECC memory)
• Supports Intel x4 and x8 Single Device Data Correction (SDDC) |
| Chipset | • Intel 5520 (Tylersburg) chipset
• ICH10R |
| SATA | • Intel ICH10R SATA 3.0Gbps Controller
• RAID 0, 1, 5, 10 support (Windows)
• RAID 0, 1, 10 support (Linux) |
| IPMI | • Support for Intelligent Platform Management Interface v.2.0
• IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
• Winbond WPCM450 BMC |
| Network Controllers | • Intel 82576 Dual-Port Gigabit Ethernet Controller
• Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
• Intel I/OAT 3 support for fast, scaleable, and reliable networking
• VMDq support for better performance of virtualization
• 1x Realtek RTL8201N PHY (dedicated IPMI) |
| Graphics | • Matrox G200eW |
| Serial ATA ports | • Six Serial ATA ports
• Six SATA hard drives supported |
| LAN ports | • 2x RJ45 LAN ports
• 1x RJ45 Dedicated IPMI LAN port |
| USB ports | • 2 rear + 1 header (2 Ports)
• 4 total USB ports, 2.0 Compliant / 1.1 Compliant |
| Video ports | • 1x VGA port |
| Serial Port / Header | • 1x serial port, 1x header |
| PCI-Express Expansion Slots | • 1 (x16) PCI-E 2.0 slot |
| BIOS Type | • 32Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | • Plug and Play (PnP)
• PCI 2.2
• ACPI up to 3.0
• USB Keyboard support |
| Voltage | • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
• CPU Core 6-Phase-switching voltage regulator |
| FAN | • Total of four 4-pin PWM fans
• 4x fans with tachometer monitoring
• Status monitor for speed control
• Status monitor for on/off control
• Low noise fan speed control (4-pin fan only) |
| Temperature | • Monitoring for CPU and chassis environment
• CPU thermal trip support
• Thermal Control for 4x Fan Connectors
• PSU I2C temperature sensing logic
• Thermal Monitor 2 (TM2) support
• PECI |
| LED | • Power Fail / Overheat LED
• Suspend-state Indicator LED
• UID LED |
| Other Features | • SDDC Support |
| Form Factor | • Proprietary |
| Dimensions | • 16.64" x 6.5 " (42.26cm x 16.51cm) |