Supermicro GPU SuperWorkstation 7048GR-TR Dual Intel Socket LGA 2011-3 C612 Chipset 2x 2000W PSU 8-HDD Tray 4U Barebone Server SYS-7048GR-TR X10DRG-Q.

Model Number: 7048GR-TR
Supermicro Part Number: SYS-7048GR-TR
Backplane Part Number: BPN-SAS-747TQ
PSU Part Number: PWS-2K04A-1R







Features:

- Dual socket R3 (LGA 2011) supports Intel Xeon processor E5-2600 v4/ v3 family; QPI up to 9.6GT/s
- Up to 2TB ECC 3DS LRDIMM , up to DDR4- 2400MHz ; 16 DIMM slots
- 4x PCI-E 3.0 x16 slots, 2x PCI-E 3.0 x8 (1 in x16) slots support Thunderbolt 2.0 AOC, 1x PCI-E 2.0 x4 (in x8) slot; Up to 4 NVIDIA GPU
- I/O ports: 1 VGA, 2 COM, 2 GbE,, 10x USB 2.0, & 1 IPMI Dedicated LAN
- 8x Hot-swap 3.5", 3 Fixed 5.25" and 1 Fixed 3.5" Drive Bays
- 4x Heavy Duty Fans, 2x Exhaust Fans, and 2 Active Heatsink with Optimal Fan Speed Control
- 2000W High efficiency (96%) Redundant PSU; Titanium Level
- Tower or Rackmount setups
- GPU Kit for passive GPU/Xeon Phi support (MCP-320-74701-0N-KIT)

Parts Included
- Motherboard / Chassis: 1x MBD-X10DRG-Q Motherboard, 4U Chassis
- Backplane: 1x BPN-SAS-747TQ Board
- 1x Manual
- 2x PWS-2K04A-1R 2000W Power Supplies
- 1x Power Distributor
- 2x SNK-P0050AP4 4U Heatsinks
- 8x CBL-0484L SATA Cables
- 2x CBL-CDAT-0661 Cables
- 2x Vertical Mounting Feet
- 8x HDD Trays
- 1x Front panel key











Specifications:

Motherboard
- Super X10DRG-Q

Processor
CPU
- Intel Xeon processor E5-2600 v4/ v3 (up to 160W TDP)*
- Dual Socket R3 (LGA 2011)
    * BIOS version 2.0 or above is required
Core / Cache: Up to 22 Cores / Up to 55MB Cache
System Bus: QPI up to 9.6 GT/s
GPU Support: NVIDIA Tesla K1/K2/K10/K40/K80/M40/M60/Xeon Phi

System Memory
Memory Capacity
- 16x 288-pin DDR4 DIMM slots
- Up to 2TB ECC 3DS LRDIMM, 1TB ECC RDIMM
Memory Type: 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes
- RDIMM: 64GB, 32GB, 16GB, 8GB, 4GB
- LRDIMM: 64GB, 32GB
- 3DS LRDIMM: 128GB
Memory Voltage: 1.2 V
Error Detection: Corrects single-bit errors

On-Board Devices (per node)
Chipset: Intel C612 chipset
SATA: SATA3 (6Gbps); RAID 0, 1, 5, 10
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM over LAN support
- Aspeed AST2400 BMC
Network Controllers
- Intel i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
Video: ASPEED AST2400 BMC

Input / Output (per node)
SATA: 10 SATA3 (6Gbps) ports
LAN
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
USB
- 5x USB 3.0 ports (2 rear, 2 via header, 1 Type A)
- 4x USB 2.0 ports (2 rear, 2 via headers)
Audio: HD Audio
Video: 1x VGA port
Serial Port / Header: 2x COM ports (1 rear, 1 Header)
Thunderbolt: Thunderbolt AOC Header

Expansion Slots
PCI-Express
- 4x PCI-E 3.0 x16 (double-width)
- 2x PCI-E 3.0 x8 (1 in x16 slot) support Thunderbolt 2.0 AOC
- 1x PCI-E 2.0 x4 (in x8)

System BIOS
BIOS Type: 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
- Plug and Play (PnP)
- APM 1.2
- DMI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI







Chassis
Form Factor
- 4U Rackmountable / Tower
- Optional Rackmount Kit
Model
- CSE-747BTQ-R2K04B

Front Panel
Buttons
- Power On/Off button
- System Reset button
LEDs
- Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat & Power Fail LED
Ports: 2x Front USB 3.0 Ports

Drive Bays
Hot-swap: 8 Hot-swap 3.5" SAS/SATA Drive Trays
Peripheral Bay(s)
- 3x 5.25" drive bays in storage module - rotates 90° for Rackmount
- 1x 3.5" fixed drive bay

SAS / SATA Backplane
SAS / SATA Hard Drive Backplane with SES

System Cooling
Fans
- 4x 92x38mm 4-pin PWM Middle Cooling Fans
- 2x Rear exhaust fans
- 2x Optional Rear fans (required for Passive GPUs)
Heatsink
- 2x Active Heatsink with Optimal Fan Speed Control

Power Supply (76mm Width)
2000W Redundant Power Supplies with PMBus
Total Output Power
- 1000W: 100 – 127Vac
- 1800W: 200 – 220Vac
- 1980W: 220 – 230Vac
- 2000W: 230 – 240Vac
- 2000W: 200 – 240Vdc (UL/cUL only)
Input
- 1000W: 100-127 Vac / 12-9.5 A / 50-60 Hz
- 1800W: 200-220 Vac / 10-9.5 A / 50-60 Hz
- 1980W: 220-230 Vac / 10-9.8 A / 50-60 Hz
- 2000W: 230-240 Vac / 10-9.8 A / 50-60 Hz
- 2000W: 200-240 Vac / 11.8-9.8 A / 50-60 Hz (UL/cUL only)
+12V
- Max: 83.3A / Min: 0A (100-127 Vac)
- Max: 150A / Min: 0A (200-220 Vac)
- Max: 165A / Min: 0A (220-230 Vac)
- Max: 166.7A / Min: 0A (230-240 Vac)
- Max: 166.7A / Min: 0A (200-240 Vac) (UL/cUL only)
+5Vsb: Max: 1A / Min: 0A
Output Type: 27 Pairs Gold Finger Connector

PC Health Monitoring
CPU
- Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory, Chipset Voltages.
- 6-Phase-switching voltage regulator
FAN
- Total of eight fan headers supporting up to 8 fans
- 8x fans with tachometer status monitoring
- Status monitor for speed control
- Pulse Width Modulated (PWM) fan connectors
Temperature
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 8x fan connectors
- Thermal Monitor 2 (TM2) support
- PECI
LED
- CPU / System Overheat LED
- Suspend static indicator LED
- UID/Remote LED
Other Features
- Chassis intrusion detection
- Chassis intrusion header

Operating Environment / Compliance
RoHS: RoHS Compliant
Environmental Spec.
- Operating Temperature: 10°C to 35°C (50°F to 95°F)
- Non-operating Temperature: -40°C to 70°C (-40°F to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5% to 95% (non-condensing)