PC Chips P49G V1.0 LGA775 Intel G41 DDR3 Micro ATX Desktop Motherboard. The P49G V1.0 has a really small form factor of 255x170 mm with high transfer rate of FSB1333, dual channel DDR3 1066 with 4GB memory support. It is also compatible with the latest Intel 45nm, dual-core processors. The P49G is a sure product to access the greatest enjoyment.
Please Note: This is an OEM motherboard and it does not come with rear I/O shield also known as back-plate cover; this part is not needed and you can still install the board in standard ATX case.
Specifications:
| CPU | Intel Socket LGA775
Supports Intel Core 2 Quad / Core 2 Duo / Pentium Dual Core processors |
| FSB | 1333/1066/800 MHz |
| Chipset | Intel G41 & ICH7 |
| Memory | Dual Channel Memory Architecture
x2 Slots x 240-Pin DDR3
Supports up to 4GB
Supports DDR3 1333/1066 MHz |
| Storage | x2 Serial ATA II Devices
x1 Ultra DMA 100/66 |
| Graphics | Intel Graphics Media Accelerator 3100 (GMA3100) |
| Audio | High Definition Audio (HD Codec) |
| Network | 10/100 MBps |
| Expansion Slots | x1 PCI Express x16 Slot
x1 PCI Express x1 Slot
x1 PCI Slot |
| Rear Panel I/O Ports | x1 Keyboard PS/2 port
x1 VGA port
x4 USB 2.0 port
x1 Audio I / O (Line-in, Line-out Mic-in)
x1 RJ 45 Port
x1 Mouse PS/2 Port |
| Internal I/O Connectors & Outputs | x1 24 Pin ATX Power Plug
x2 USB 2.0 Connector supports 4 additional USB 2.0 Ports
x1 IDE Connector
x1 Front Panel LED Connector
x1 SPDIF-out Connector
x1 ATX 12V Power Connector
x2 Serial ATA Connector
x1 CLR CMOS Header
x1 Front Panel Audio Connector
x1 Speaker Connector
x1 Printer Header |
| System BIOS | AMI BIOS with 8Mb SPI Flash ROM |
| Form Factor | Micro-ATX (244 x 200mm) |
