Intel G965 Chipset Motherboard. This Motherboard Supports Intel Pentium 4, Pentium 4 HT, Pentium D, Celeron D, Core2 Extreme, and Core2 Duo processors. Please note this motherboard features Gateway Logo when booted, this board can be used in STANDARD BTX cases. This board is not designed for ATX cases, this is the new style BTX.
Features:
Intel G965 chipset
Supports Intel Pentium 4, Pentium 4 HT, Pentium D, Celeron D, Core 2 Extreme, and Core2 Duo processors
LGA775 socket
1066, 800, or 533 MHz system bus
Memory support for DDR2 800, 667, or 533 MHz DIMMs, expandable up to 8 GB
Integrated Intel Ekron-N (82562V) 10/100 Ethernet LAN
Integrated VGA and DVI with HDCP graphics
Integrated high definition audio using Sigmatel STAC9271 codec
Four add-in card slots:
Two PCI conventional
One ×16 PCI Express
One ×1 PCI Express
Packaging: OEM System Builder Bulk Packed. IO Shield not included.
Specifications:
| Form Factor | uBTX 10.4 × 10.5 inches |
| Chipset | Intel® G965 and ICH8-DH |
| Processor Support | Support for the following Intel LGA775 socket processors with a 1066, 800, or 533 MHz system bus - Pentium® 4
- Pentium 4 with Hyper-Threading Technology
- Pentium D
- Celeron® D
- Core2 Extreme
- Core2 Duo
|
| Memory | Four 240-pin DDR2 SDRAM Dual Inline Memory Module (DIMM) sockets DDR2 800, 667, or 533 MHz DIMMs Single and dual channel modes supported Expandable up to 8 GB total memory |
| LAN Support | Integrated Intel Ekron-N (82562V) 10/100 Ethernet LAN |
| Video | Integrated VGA and DVI with HDCP graphics |
| Audio | Integrated high definition audio using Sigmatel STAC9271 codec |
| Add-in Card Slots | One ×16 PCI Express One ×1 PCI Express Two PCI conventional |
| Rear panel ports | One PS/2 keyboard port One PS/2 mouse port Six USB 2.0 ports One IEEE-1394a port One VGA monitor port One DVI with HDCP monitor port One RJ-45 network port |
| Internal Interfaces | Two USB 2.0 connectors supporting 2 ports each One front-panel IEEE-1394a connector One serial port connector One parallel port connector Six serial ATA II interfaces One parallel ATA IDE connector with UDMA 33, ATA-66/100 support One floppy disk drive connector Chassis intrusion connector Front panel header (2 × 5) BIOS configuration jumper Front panel audio connector (2 × 5) HD audio link connector |
| Additional Features | Advanced fan speed control integrated into chipset Port Angeles 3.0/1.6 super I/O controller Piezo speaker for BIOS POST codes Stand-by power LED (green) 4-Layer micro-BTX (uBTX) form factor Board dimensions: 10.5 x 10.4BIOS configuration jumper Custom PIF/EFI BIOS Intel quick resume technology RoHS compliant Intel Viiv 1.5 technology compliant |
| A | CPU fan connector | M | Front panel USB connectors |
| B | Memory slots | N | BIOS configuration jumper |
| C | Rear chassis fan connector | O | Front chassis fan connector |
| D | Front panel audio connector | P | Front panel connector |
| E | Processor core power connector | Q | Serial port connector |
| F | Battery | R | Parallel port connector |
| G | ATX main power connector | S | Front panel IEEE-1394a connector |
| H | Rear panel ports | T | PCI Express x16 connector |
| I | Processor socket | U | PCI Express x1 connector |
| J | HD audio link connector | V | Parallel ATA IDE connector |
| K | Intrusion switch connector | W | Floppy disk drive connector |
| L | SATA connectors | X | PCI conventional connectors |