Advanced Search
Hp Gigabit-LX Fiber Card J4114-60001
$26.99Free Shipping!
Item Code:
Part Number:
Item Condition Description:
Please note, this item is used and has minor scuffs and scratches, but is fully tested & completely operational.
Item Description

Genuine Original Hewlett Packard Gigabit-LX Fiber Module Card for ProCurve 4000M J4114A J4114-60001. The HP ProCurve Switch Modules are components that you can add to an HP ProCurve switch to provide a variety of network connectivity options. The J4114A is one fiber-optic port with SC connector for 1000 Mbps (Gigabit Ethernet) operation over single mode or multimode fiber-optic cable.

Model Number: J4114A
Part Number:


Cable TypeSingle mode fiber-optic cables that are fitted with SC connectors.
62.5/125 mm or 50/125 mm core/cladding diameter graded-index, multimode fiber-optic cables may also be usable, but a mode conditioning patch cord may be needed
Maximum Length5 kilometers
The default port configurations Gigabit-LX Module: 1000FDx — 1000 Mbps, Full Duplex
TemperatureOperating 0C to 55C (32F to 131F) Non-Operating -40C to 70C (-40F to 158F)
Relative humidity: (non-condensing)Operating  15% to 95% at 40C (104F)  Non-Operating 15% to 90% at 65C (149F)
Maximum altitude:Operating 4.6 Km (15,000 ft) Non-Operating 4.6 Km (15,000 ft)
ConnectorsThe port on the Gigabit-LX Module transmits at 1300 nm wavelength, and is compatible with the IEEE 802.3z Gigabit-LX standard. It accepts the single mode or multimode fiber-optic cables for Gigabit-LX.
Fiber-Opticsingle mode fiber-optic cables, complying with the ITU-T G.652 and ISO/IEC 793-2 Type B1 standards, fitted with SC connectors OR 62.5/125 mm or 50/125 mm (core/cladding) diameter, gradedindex, multimode fiber-optic cables, complying with the ITU-T G.651 and ISO/IEC 793-2 Type A1b or A1a respectively, fitted with SC connectors





Please wait...
The request is currently being processed.
Please do not navigate to another page during this process.
Thank you for your patience.
Cancel request