SuperMicro X9DRL-iF Rev: 1.01 Intel Chipset C602 Dual Socket LGA2011 DDR3 ATX Server Motherboard.







Features:

- Dual socket R (LGA 2011) supports Intel Xeon processor E5-2600 and E5-2600 v2 family
- Intel C602 chipset; QPI up to 8.0GT/s
- Up to 512GB ECC DDR3, up to 1866MHz; 8x DIMM slots
- Expansion slots: 1 PCI, 1 PCI-E 2.0 x1 3 PCI-E 3.0 x8, 1 PCI-E 2.0 x4 (in x8)
- Intel 82574L GbE LAN, 2 ports
- 8x SATA2 and 2x SATA3 ports
- Integrated IPMI 2.0 and KVM with Dedicated LAN
- 9x USB 2.0 ports (4 rear, 4 via header + 1 Type A)








Specifications:

Physical Stats:
Form Factor: ATX
Dimensions: 12" x 10" (30.48cm x 25.4cm)

Processor/Cache:
CPU: Intel Xeon processor E5-2600 and E5-2600 v2 family (up to 130W TDP **) Dual Socket R (LGA 2011)
Cache: Up to 30MB
System Bus: QPI up to 8 GT/s
Note BIOS version 3.0 or above is required
Note ** Motherboard supports this maximum TDP. Please verify your system can thermally support

System Memory:
Memory Capacity: 8x 240-pin DDR3 DIMM slots, Up to 512GB DDR3 ECC LRDIMM, Up to 256GB DDR3 ECC RDIMM, Up to 64GB DDR3 ECC/non-ECC UDIMM
Memory Type: 1866/1600/1333/1066/800MHz* ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs, Support ECC and non-ECC UDIMMs
* Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.
DIMM Sizes: 32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM
Memory Voltage: 1.5 V, 1.35 V
Error Detection: Corrects single-bit errors Detects double-bit errors (using ECC memory)

On-Board Devices:
Chipset: Intel C602 chipset
AHCI SATA: SATA 2.0 3Gbps with RAID 0, 1, 5, 10 SATA 3.0 6Gbps with RAID 0, 1, 5, 10
SCU SATA : SATA 2.0 3Gbps with RAID 0, 1, 5, 10
IPMI: Support for Intelligent Platform Management Interface v.2.0, IPMI 2.0 with virtual media over LAN and KVM-over-LAN support, Nuvoton WPCM450 BMC
Network Controllers: Intel 82574L Gigabit Ethernet, Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output, 1x Realtek RTL8201N PHY (dedicated IPMI)
Video: Matrox G200eW

Input / Output:
AHCI SATA: 2x SATA 3.0 ports (6Gbps), 4x SATA 2.0 ports (3Gbps)
SCU SATA: 4x SATA 2.0 ports (3Gbps)
LAN: 2 RJ45 Gigabit Ethernet LAN ports, 1 RJ45 Dedicated IPMI LAN port
USB: 9 USB 2.0 ports total (4 rear + 4 via header + 1 Type A)
Video: 1 VGA port
Serial Port / Header: 2 Fast UART 16550 port / 1 Header
DOM: 1 DOM (Disk on Module) power connector
TPM: 1 TPM Header

Expansion Slots:
PCI-Express: 3 PCI-E 3.0 x8, 1 PCI-E 2.0 x4 (in x8), 1 PCI-E 2.0 x1, 1 PCI

System BIOS:
BIOS Type: 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features: Plug and Play (PnP), APM 1.2, PCI 2.3, ACPI 1.0 / 2.0 / 3.0 / 4.0, USB Keyboard support, SMBIOS 2.7.1, UEFI 2.3.1

Management:
Software: SuperDoctor III, Watch Dog, NMI, IPMI 1.5 / 2.0
Power Configurations: ACPI / APM Power Management, Power-on mode for AC power recovery

PC Health Monitoring:
Voltage: Monitors for CPU Cores, +1.1V, +1.5V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 5+1 Phase-switching voltage regulator
FAN: 8x 4-pin fan headers (up to 8 fans), 8x fans with tachometer monitoring, Status monitor for speed control, Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Control for 8x Fan Connectors, Thermal Monitor 2 (TM2) support, PECI
LED: CPU / System Overheat LED, Suspend static indicator LED, UID/Remote UID
Other Features: Chassis intrusion detection, Chassis intrusion header, RoHS, Halogen Free, Dual Cooling Zones

Operating Environment:
Operating Temperature Range: 10°C - 35°C (50°F - 95°F)
Non-Operating Temperature Range: -40°C - 70°C (-40°F - 158°F)
Operating Relative Humidity Range: 8% - 90% (non-condensing)
Non-Operating Relative Humidity Range: 5% - 95% (non-condensing)