Advanced Search
SuperMicro X7SBL-LN2 Motherboard
We apologize but this item is currently unavailable. Please feel free to browse our website for other available items.
Enlarge
Item Code:
MBRSMX7SBLLN2R1
Manufacturer:
Model:
X7SBL-LN2 REV:1.01
Item Condition Description:
Please note, this item comes with a backplate only. No other accessories included.
Item Description

SuperMicro X7SBL-LN2 REV:1.01 Intel LGA775 Socket DDR2 Micro ATX Dual LAN Desktop Server Motherboard.







Specifications:

Physical Slats

Form Factor
- MicroATX (uATX)
Dimensions
- 9.6" width x 9.6" length , (24.4cm x 24.4cm), 6 layers

Processor/Cache

CPU
- Single LGA775 ZIF Socket
- Supports Quad-Core Intel Xeon X3300/X3200 series
- Supports Dual-Core Intel Xeon E3100/3000 series
- Supports Intel Xeon processor L3360 and L3110 series
- Supports Intel Core2 Quad Q9000/Q8000/Q6000 series
- Supports Intel Core2 Duo E8000/E7000/E6000/E4000 series
- Supports Intel Pentium E5000/E2000 series
- Supports Intel Celeron E1000 and 400 series
NOTE: Intel Xeon processor L3014 requires an LGA771 socket and is not supported.
System Bus
1333 / 1066 / 800 MHz system bus

System Memory

Memory Capacity
- Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered ECC / non-ECC DDR2 800/667MHz memory (Dual Channel)
Memory Type
- DDR2 800/667MHz unbuffered ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
DIMM Sizes
- 256 MB, 512 MB, 1 GB, 2GB
Memory Voltage
- 1.8V only

On-Board Devices

Chipset
- Inte 3200 chipset
- ICH9R chipset
Serial ATA
- Intel® ICH9R SATA2 (3 Gbps) controller built-in
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
IPMI
- Support for 1U Intelligent Platform Management Interface v.2.0 / 1.5
- (Optional: AOC-SIMLC-HTC)
Network Controllers
- 1x Intel 82573V Gigabit PCI-Express Ethernet
- 1x Intel 82573L Gigabit PCI-Express Ethernet
- Supports 10Base-T, 100Base-TX, 1000BASE-TX, RJ45 output
VGA
- On-board XGI Volari Z9S 32MB graphics
Super I/O
- Winbond 83627HG chip
Clock Generator
- CK505

Input / Output

Serial ATA
- Six Serial ATA ports (3 Gbps performance)
- Six SATA hard drives supported
Floppy
- 1 Floppy controller; 1.44 MB
LAN
- 2 x RJ45 LAN port
USB
- 7x USB 2.0 / 1.1 compatible
- 2 rear + 2 headers ( 4 ports ) + 1 on-board
VGA
- 1x VGA Port
Keyboard / Mouse
- PS/2 keyboard and mouse ports
Serial Ports
- 1x Fast UART 16550 serial port
- 1x Header

Expansion Slots

PCI-Express
- 1 (x8) PCI-E slot
- 1 (x4) PCI-E (using x8) slot
PCI
- 2x 32-bit 33MHz PCI (5V) slot

System BIOS

BIOS Type
- 8Mb Flash EEPROM with Phoenix BIOS®
BIOS Features
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0/2.0
- USB Keyboard support
- SMBIOS 2.3

Management

Software
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor III
- Watch Dog
- NMI
- W83793 H/W Monitor
Power Configurations
- ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- Power-on mode control for AC power loss recovery
- Internal / External Modem Rign-on
- Suspend to RAM (STR)

PC Health Monitoring

Voltage
- Monitors for CPU Cores +1.8V, +3.3V, +5V, ±12V, 3.3V Standby, 5V Standby, VBAT
- CPU 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio (Only available if CPU is supported)
FAN
- Total of six 4-pin fan headers
- 6 fans with tachometer monitoring
- Status monitor with firmware speed control
- Low noise fan speed control
- Status monitor for on/off control
- Support 3-pin fans (without speed control)
- Pulse Width Modulated (PWM) fan connector
Temperature
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
- PECI
LED
- CPU / System Overheat LED
- Suspend state indicator LED
- Standby Power alert LED
Other Features
- Chassis Intrusion Detection
- Chassis Intrusion Header

Operating Environment

Environmental Spec.
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)







Please wait...
The request is currently being processed.
Please do not navigate to another page during this process.
Thank you for your patience.
Cancel request