SuperMicro X7DVL-E REV:1.21 Intel Dual LGA771 Socket FB-DIMM DDR2 ATX Desktop Server Motherboard. The X7DVL-E motherboard provides the performance and feature set required for dual processor-based servers with configuration options optimized for communications, presentation, storage, computation or database applications. The 5000V (Blackford-VS) chipset supports a single or dual Dempsey/Woodcrest 64-bit dual core processor(s) with front side bus speeds of up to 1.333 GHz.







Specifications:

Physical Slats

Form Factor
- ATX
Dimensions
- 12" x 10" (30.5cm x 25.4cm)

Processor/Cache

CPU
- Dual 771-pin LGA Sockets
- Supports up to two Intel® 64-bit Xeon® processor(s) of the same
type below:
 - Quad-Core Intel®
Xeon®Processor
5400/5300 sequence
(Harpertown/Clovertown processor)
up to 3.16 GHz
- Dual-Core Intel®
Xeon®Processor 5200/5100/5000
sequence (Wolfdale/Woodcrest/Dempsey processor) up to 3.40 GHz
System Bus
1333 / 1066 / 667 MHz system bus
Operating System Software
- Supports 64-bit Operating Systems
- Supports 32-bit Operating Systems

System Memory

Memory Capacity
- Six 240-pin DIMM sockets
- Supports up to 24 GB 667 / 533MHz DDR2 ECC FB-DIMM memory
- Dual branch memory bus
- Memory must be populated in pairs
- No Memory Mirroring support
Memory Type
- 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes
- 512 MB, 1GB, 2GB, 4GB
Memory Voltage
- 1.8V only
- 1.5V(AMB)
Error Detection
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
- Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices

Chipset
- Intel® 5000V (Blackford VS) chipset
- MCH + ESB2
SATA
- Intel ESB2 SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support (Windows Only)
- RAID 0, 1, 10 support (Linux)
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- 200-pin IPMI slot (SIM1U)
- (Optional: AOC-SIMLC(+), AOC-SIM1U(+))
Network Controllers
- Intel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- Intel® I/OAT support for fast, scaleable, and reliable networking
Graphics
- ATI ES1000 controller with 16 MB of video memory
Super I/O
- Winbond 83627HG chip

Input / Output

Serial ATA
- Six Serial ATA ports
- Six SATA hard drives supported
IDE
- Single EIDE channel supports up to two UDMA IDE devices (IDE-M, IDE-S)
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
Floppy
- 1 Floppy controller; 1.44 MB 2.88 MB
LAN
- 2 x RJ45 LAN ports
USB
- 2x USB rear ports
- 2x USB internal headers
- Total 6 USB 2.0 Compliant / 1.1 Compliant
VGA
- 1x VGA Port
Keyboard / Mouse
- PS/2 keyboard and mouse ports
Serial Port / Header
- 1 Fast UART 16550 serial port
- 1 Fast UART 16550 serial header
Parallel Port
-1 Header for ECP / EEP parallel port

Expansion Slots

PCI-Express
- 1 (x8) PCI-e slot
- 1 (x4) PCI-e (using x8) slot
PCI-X
- 2x 64-bit 133/100MHz PCI-X (3.3V) slots
PCI
- 2x 32-bit 33MHz PCI (3.3V) slots

System BIOS

BIOS Type
- 8Mb Flash EEPROM with Phoenix® BIOS
BIOS Features
- Plug and Play (PnP)
- SMBIOS 2.3
- DMI 2.1
- PCI 2.2
- ACPI 1.0
- USB Keyboard support
- Hardware BIOS Virus protection

Management

Software
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
Power Configurations
- ACPI Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Power-on mode for AC power recovery
- Internal / External modem remote ring-on

PC Health Monitoring

Voltage
- Monitors for CPU Cores, +3.3V, +5V, ±12V
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
- Total of six 4-pin fan headers supporting up to 6 fans
- 6x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
Temperature
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Monitor 2 (TM2) support
LED
- CPU / System Overheat LED
Other Features
- Chassis intrusion detection
- Chassis intrusion header
- SDDC Support

Operating Environment

Environmental Spec.
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)

OS Compatibility

- MS Win 2000 Pro + SP4
- MS Win 2000 Server + SP4
- MS Win 2000 Advanced Server + SP4
- MS Win XP Pro + SP2
- MS Win 2003 Server Standard Edition
- MS Win 2003 Server Enterprise Edition
- MS Win XP Pro x64
- MS Win 2003 Server Enterprise Edition x64