Supermicro X10SLL-F Intel LGA1150 C222 DDR3-1600 SDRAM SATA uATX Server Motherboard.
Key Features:
1. Single socket H3 (LGA1150) supports Intel Xeon E3-1200 v3, 4th gen. Core i3, Pentium, Celeron processors
2. Intel C222 Express PCH
3. Up to 32GB DDR3 ECC 1600MHz UDIMMs in 4 sockets
4. Dual Gigabit Ethernet LAN ports (1x Intel i217LM & 1x Intel i210AT)
5. 2x SATA (6Gbps), 4x SATA (3Gbps)
6. Expansion slots: 1x PCI-E 3.0 x8 (in x16), 1x PCI-E 3.0 x8, and 1x PCI-E 2.0 x4 (in x8) slots
7. 2x USB 3.0 (1 Type-A + 1 via header) 6x USB 2.0 (4 rear + 2 via header)
8. SATA DOM power connector support
9. VGA D-sub connector, TPM header
10. Integrated IPMI 2.0 with KVM and Dedicated LAN
Specifications:Brand Supermicro
Model X10SLL-F REV: 1.02
CPU Support
- Intel Xeon processor E3-1200 v3 and 4th Gen Core i3, Pentium, Celeron processors
- Single Socket H3 (LGA1150)
Memory Capacity
- 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 ECC Un-Buffered memory (UDIMM)
Memory Type 1600MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 1GB, 2GB, 4GB, 8GB
Memory Voltage 1.5V, 1.35V
Error Detection
- Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
Chipset Intel C222 Express PCH
SATA
- SATA3 (6Gbps) w/ RAID 0, 1
- SATA2 (3Gbps) w/ RAID 0, 1, 5, 10
IPMI
- Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Aspeed AST2400 with 10/100/1000M bps MAC
Network Controllers
- Intel i217LM + Intel i210AT Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8211E PHY (dedicated IPMI)
VGA BMC integrated Aspeed AST2400
Serial ATA
- 2x SATA3 (6Gbps) ports
- 4x SATA2 (3Gbps) ports
LAN
- 2x Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
USB
- 2x USB 3.0 ports (1 Type-A, 1 via header)
- 6x USB 2.0 ports (4 rear, 2 via header)
VGA 1x VGA D-Sub Connector
Serial Port / Header 2x COM ports (1 rear, 1 header)
DOM SATA DOM (Disk on Module) power connector support
TPM 1x TPM 1.2 20-pin Header
PCI-Express
- 1x PCI-E 3.0 x8 (in x16) slot
- 1x PCI-E 3.0 x8 slot
- 1x PCI-E 2.0 x4 (in x8) slot
BIOS Type 128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features
- DMI (SMBIOS) 2.7
- ACPI 5.0
- USB Keyboard support
Power Configurations
- ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
Voltage
- Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN
- Total of five 4-pin fan headers supporting up to 5 fans
- 5x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
Temperature
- Monitoring for CPU and chassis environment
- CPU thermal trip support
- FC temperature sensing logic
- Thermal Monitor 2 (TM2) support
- PECI
LED
- CPU / System Overheat LED
- +5V Standby alert LED
Other Features
- Chassis intrusion detection
- Chassis intrusion header
Form Factor uATX
Dimensions 9.6" x 9.6", (24.4cm x 24.4 cm)
