SuperMicro 5036T-TB Barebone Server with Intel X58 Chipset. Supermicro's mid-tower 5036T-TB SuperWorkstation platform supports the new Intel Core™ i7 and Xeon® 5600/5500/3500 processor families, and up to 24 GB of DDR3 memory at 1333 MHz. These systems feature dual x16 PCI-E 2.0, 1 PCI-E x4 (x8), 2x PCI-X 133MHz, 1 PCI-32 slot, with support for ATI® CrossFireX™ technology to provide the performance you need for computer-aided design, digital content creation, and video production.
KEY FEATURES:
- Intel® Core™ i7 / i7 Extreme Edition, and Intel® Xeon® 5600/5500/3600/3500 series (QPI up to 6.4 GT/s)
- Up to 24GB DDR3 1333, 1066 & 800 ECC / non-ECC Un-Buffered DIMM
- 2 (x16) PCI-Express 2.0,
1 (x4) PCI-Express (using X8 slot),
2x 64-bit 133/100MHz PCI-X,
1x 32-bit PCI Slots - Intel® Dual 82574L Gigabit Ethernet Controller
- 4 x Hot-swappable SATA Hard Drive Bays
- 465W High-Efficiency, Low-noise Power Supply
SPECIFICATIONS:
| Product SKUs | | SYS-5036T-TB | SuperServer 5036T-TB (Black) |
| Motherboard |
| Super X8SAX |
| Processor/Cache |
| CPU | LGA 1366 Socket Intel® Core™ i7-980X, i7-975 and i7-965 Extreme Edition Intel® Core™ i7 series Intel® Xeon® 5600/5500 series Intel® Xeon® 3600/3500 series
|
| System Bus | QPI (up to 6.4 GT/s) |
| System Memory |
| Memory Capacity | Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory Three Channel memory bus 6 DIMM sockets |
| Memory Type | 1333 / 1066 / 800MHz Un- Buffered ECC / non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256MB, 512MB, 1GB, 2GB, 4GB |
| Memory Voltage | 1.5 V only |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) Supports Intel® x4 and x8 Single Device Data Correction (SDDC) |
| On-Board Devices |
| Chipset | Intel® X58 Express chipset ICH10R + PXH/V |
| Serial ATA | Intel ICH10R SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support |
| Network Controllers | Dual Intel® 82574L Gigabit Ethernet Controller Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Audio | Realtek ALC883 7.1 HD audio |
| Super I/O | Winbond 83627DHG chip |
| Clock Generator | CK505 |
| Expansion Slots |
| PCI-Express | 2 (x16) PCI-e 2.0 slots 1 (x4) PCI-e slot (using x8 slot) |
| PCI-X | 2x 64-bit 133 / 100MHz PCI-X (3.3V) slots |
| PCI | 1x 32-bit PCI slot |
| Input / Output |
| Serial ATA | Six Serial ATA ports Six SATA hard drives supported |
| Floppy | 1 Floppy controller; 1.44 MB |
| LAN | 2x RJ45 LAN port |
| USB | 8x USB rear ports 2x USB on-board 2x USB Front ports Total 12 USB 2.0 Compliant |
| Audio | Realtek ALC883 7.1 HD audio 1x S/PDIF digital output |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Port / Header | 2x Fast UART 16550 serial header |
| System BIOS |
| BIOS Type | 4Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | DMI 2.3 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 |
| Chassis |
| Form Factor | Mid-Tower |
| Model | SC733TQ-465B |
| Physical Features |
| Height | 16.8" (427 mm) |
| Width | 7" (178 mm) |
| Depth | 20.9" (531 mm) |
| Weight | 39 lbs (17.7 kg) |
| Available Colors | Black |
| Front Panel |
| Buttons | Power On/Off button System Reset button |
| LEDs | Power LED Hard drive activity LED Network activity LED System Overheat LED |
| Ports | 2x Front side USB ports (USB 2.0 ready) |
| Drive Bays |
| Hot-swap | 4x 3.5" SATA hot-swap drive bays |
| Peripheral Bay | 2x 5.25" peripheral drive bay 1x 3.5" bay for floppy drive |
| Peripheral Drives |
| Floppy | Teac Floppy Drive 3.5" 1.44MB (Optional) |
| System Cooling |
| Fans | 1x 9.2cm Front Thermal Fan 1x 12cm Exaust Fan (Optional) |
| SATA Backplane |
| 4 x 3.5" SATA Backplane |
| Power Supply |
| 465W AC power supply w/ PFC |
| AC Voltage | 100 - 240V, 60-50Hz, 6-3 Amp |
| +5V | 20 Amp |
| +5V standby | 3 Amp |
| +12V | 35 Amp |
| -12V | 0.5 Amp |
| +3.3V | 15 Amp |
| PC Health Monitoring |
| CPU | Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages.6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
| FAN | Total of six fan headers supporting up to 6 fans Six 4-pin fan headers 6x fans with tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support FC temperature sensing logic Thermal Monitor 2 (TM2) support |
| LED | CPU / System Overheat LED Suspend-state indicator LED +5V standby alert LED |
| Other Features | Chassis intrusion Detection Chassis intrusion Header |