| Product SKUs |
| SYS-5035L-IB | |
| Motherboard |
Super X7SLM-L
|
| Processor/Cache |
| CPU | - Single LGA775 ZIF Socket
- Supports an Intel Core 2 Duo E4000 Series
- Supports an Intel Pentium E2000 Series
- Supports an Intel Pentium D 945, 935, 925, 915 and 820, 805
- Supports an Intel Pentium 4 600 and 500 Series
- Supports an Intel Celeron E1000 Series
- Supports an Intel Celeron 400 Series
- Supports an Intel Celeron D 300 Series
|
| System Bus | - 1066 / 800 / 533 MHz system bus
|
| System Memory |
| Memory Capacity | - Two 240-pin DIMM sockets
- Supports up to 2 GB of unbuffered, non-ECC DDR2 667/533/400MHz memory (Single / Dual Channel)
|
| Memory Type | - DDR2 667/533/400MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs
|
| DIMM Sizes | |
| Memory Voltage | |
| On-Board Devices |
| Chipset | - Intel 945GC + ICH7R
- Realtek RTL8111C-GR
|
| Serial ATA | - Intel ICH7R SATA 3.0Gbps Controller
- RAID 0, 1, 5, 10 support
|
| Network Controllers | - 2x Realtek RTL8111C-GR Gigabit Ethernet
- Supports 10BASE-T, 100/1000BASE-TX, RJ45 output
|
| Graphics | |
| Super I/O | |
| Clock Generator | |
| Expansion Slots |
| PCI-Express | - 1 (x16) PCI-Express Slot
- 1 (x4) PCI-Express (in x8 slot)
|
| PCI | - 2x 32-bit 33MHz PCI (5V) slots
|
| Input / Output |
| Serial ATA | - Four Serial ATA ports (3 Gbps performance)
- Four SATA hard drives supported
|
| IDE | - One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
| LAN | |
| USB | - 8x USB 2.0 / 1.1 compatible
- 2 rear + 2 Type A connectors + 2 headers ( 4 ports )
|
| VGA | |
| Keyboard / Mouse | - PS/2 keyboard and mouse ports
|
| Serial Ports | - 1x Fast UART 16550 serial ports
- 1x Serial Header
|
| System BIOS |
| BIOS Type | - 8Mb Flash EEPROM with AMI BIOS
|
| BIOS Features | - Plug and Play (PnP)
- APM 1.2
- DMI 2.3
- PCI 2.2
- ACPI 1.0 / 2.0 / 3.0
- USB Keyboard support
- Hardware BIOS Virus protection
- SMBIOS 2.3
|
| Chassis |
| Form Factor | Mid-Tower |
| Model | CSE-731i-300B |
| Physical Features |
| Height | |
| Width | |
| Depth | |
| Weight | |
| Available Colors | |
| Front Panel |
| Buttons | - Power On/Off button
- System Reset button
|
| LEDs | - Power LED
- Hard drive activity LED
- Network activity LED
- System Overheat LED
|
| Ports | - 2x Front side USB ports (USB 2.0 ready)
|
| Drive Bays |
| Internal | - 4x 3.5" tool-less HDD trays
|
| External | - 2x 5.25" peripheral drive bay
- 1x 3.5" external drive bay (OEM option)
|
| System Cooling |
| Fans | - 1x 9cm (rear) PWM fan w/ tool-less design
- 1x 8cm (front) cooling fan (optional)
|
| Power Supply |
300W AC power supply w/ PFC
|
| AC Voltage | - 100 - 240V, 60-50Hz, 5 Amp
|
| DC Output | - 5V + 12V + 3.3V - 12V < 290W
|
| +5V | |
| +5V standby | |
| +12V | |
| -12V | |
| +3.3V | |
| PC Health Monitoring |
| CPU | - Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V/+5V Standby, VBAT, Memory, Chipset
- CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
|
| FAN | - Total of five 4-pin fan headers
- 5 x fans with tachometer monitoring
- Status monitor for speed control
- Status monitor for on / off control
- Support 3-pin PWM fans (without speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan conn.
|
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Thermal Control for 5 x Fan Connectors
- I2C temperature sensing logic
- Thermal Monitor 2 (TM2) Support
- PECI
|
| LED | - CPU / System Overheat LED
- Suspend-state indicator LED
- +5V standby alert LED
|
| Other Features | - Chassis intrusion Detection
- Chassis intrusion Header
- SDDC Support
|