Dell Aruba Networks W-IAP155 Remote Access Point 94G4D. The multifunctional Dell W-IAP155 Series delivers secure 802.11n wireless and wired networking to SMBs and access to corporate resources from branch and home offices. The W-IAP155 Series can be deployed flexibly in either “virtual controller” (or “Instant”) mode (managed by Airwave Management Platform) or in “Controller Managed” mode where all traffic is centralized by Dell Networking W-Series Mobility Controllers. The W-IAP155 Series offers a variety of enterprise-class features, including role-based network access, policy-based forwarding, and Adaptive Radio Management™, which gives remote workers and SMBs the same high-quality “enterprise class” WiFi experience. At locations that require greater coverage, the W-IAP155 can join a Dell Instant™ WLAN cluster. Simply install additional W-IAP155s or any Instant Access Point (AP) and the entire cluster is managed as one. If one Instant AP fails, another AP automatically takes over with no disruption. Delivering wireless data rates of up to 450Mbps, the dual-radio W-IAP155 has five Ethernet ports (one uplink and four local) and a USB port for connecting to 3G and 4G networks. Optionally, the W-IAP155 can supply Power over Ethernet (PoE) on two of its local Ethernet ports to power connected IP phones and other devices.
Dell Part Number: 94G4D 094G4D CN-094G4D
Model Number: APINR155
Advanced features
• Adaptive Radio Management delivers best-in-class RF
management, including automatic transmit power and
channel control with auto coverage-hole correction
• Spectrum analyzer remotely scans the 2.4 and 5GHz radio
bands to identify sources of RF interference
• Security:
- With an OpenDNS service subscription, Dell Instant APs
delivers integrated web filtering, malware and botnet
protection to every device connected to the WLAN
- Integrated Trusted Platform Module for secure storage of
credentials and keys
- SecureJack-capable for secure tunneling of wired Ethernet
traffic
- VPN configuration functionality enables the Instant AP to
create a single VPN tunnel from the Virtual Controller to a
Dell Mobility Controller in the data center.
Operating modes:
• Wireless
o Dell Instant AP
o Mobility Controller-managed WLAN AP or Remote AP (RAP)
o Air monitor (AM)
o Hybrid WLAN AP and AM
o Secure enterprise mesh
• Wired
- 10/100/1000Base-T Ethernet uplink port, 4x
10/100/1000Base-T Ethernet local ports
o Two of the local Ethernet ports are PoE capable
(product option)
- User authentication: 802.1X, captive portal, MAC
authentication or open access
- Policy-based forwarding for local resource access
Wireless radio specifications
• AP type: Dual radio, dual-band 802.11n indoor
• Software-configurable dual radio supports 2.4 and 5GHz
• 2x2 MIMO with two spatial streams and up to 300Mbps
wireless data rate in 2.4GHz
• 3x3 MIMO with three spatial streams and up to 450Mbps
wireless data rate in 5GHz
• Supported frequency bands (country-specific restrictions
apply):
• 2.400 to 2.4835GHz
• 5.150 to 5.250GHz
• 5.250 to 5.350GHz
• 5.470 to 5.725GHz
• 5.725 to 5.850GHz
• Available channels: Managed by Virtual Controller or
Mobility Controller, dependent upon configured regulatory
domain
• Dynamic Frequency Selection optimizes the use of available
RF spectrum
• Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum
- 802.11a/g/n: Orthogonal frequency-division multiplexing
(OFDM)
- 802.11n (2.4GHz): OFDM, 2x2 MIMO with two spatial streams
- 802.11n (5GHz): OFDM, 3x3 MIMO with three spatial streams
• Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
• Transmit power: Configurable in increments of 0.5dBm
• Maximum (conducted) transmit power (per radio transmit
chain):
• 2.4GHz band: +18dBm
• 5GHz bands: +18dBm
• Transmit power will be limited as needed to comply with
local regulatory requirements
• Advanced Cellular Coexistence to effectively deal with
interference from cellular systems
• Maximum Ratio Combining for improved receiver
performance
• Cyclic Delay Diversity for improved downlink RF
performance
• Short Guard Interval for 20 and 40MHz channels
• Space-Time Block Code for increased range and improved
reception
• Supported data rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n (2.4GHz): 6.5 to 300 (MCS0 to MCS15)
- 802.11n (5GHz): 6.5 to 450 (MCS0 to MCS23)
• 802.11n high-throughput support: HT20/40
• 802.11n packet aggregation: A-MPDU, A-MSDU
Antennas
• 2.4GHz: Two internal omni-directional antennas for 2x2 MIMO
with maximum antenna gain of 5.5dBi
• 5GHz: Three internal omni-directional antennas for 3x3 MIMO
with maximum antenna gain of 5.0dBi
• Antennas are optimized for vertical orientation of the device
Other (non-RF) interfaces
• Network:
- ENET0 (uplink): One 10/100/1000Base-T Ethernet (RJ-45),
auto-sensing link speed and MDI/MDX
- ENET1-4 (local): Four 10/100/1000Base-T Ethernet (RJ-45),
auto-sensing link speed and MDI/MDX
• ENET1 and ENET2 capable of sourcing PoE power
(W-IAP155P only)
• DC power interface:
• W-IAP155:
- 12V DC +/- 5%
- Connector: Circular plug, 1.7/4.0mm center-positive,
9.5mm length
• W-IAP155P
- 54V DC +/- 5%
• Connector: Circular plug, 1.35/3.8mm center-positive,
11.0mm length
• One USB 2.0 port (Type A receptacle)
• Serial console interface (custom header, TTL signal levels)
• Visual indicators (LEDs):
• Power/system status
• Ethernet link status (2x)
• WLAN radio status (2x)
• PoE status (2x)
• Kensington security slot
• Reset button
Encrypted VPN throughput
• Up to 100Mbps
Power supply
• DC power source (adapter ships with unit, AC power cord
ordered separately)
• W-IAP155: 12V DC from external AC-to-DC power adapter
• W-IAP155P: 54V DC from external AC-to-DC power adapter
• Maximum power consumption:
• Without USB device connected: 17.5W
• With USB device: 20W
• When sourcing PoE power (W-IAP155P only), total power
consumption may increase by up to 34W
• PoE power sourcing capabilities (RAP-155P only):
• 802.3af or 802.3at power sourcing support (PSE) provided
on two local Ethernet ports (ENET1, 2)
• Device capable of supplying 1x full 802.3at power or 2x full
802.3af power
Mechanical
• Dimensions (unit):
- With desk mount: 185 x 65 x 245mm (w x d x h)
• Weight (unit):
• With desk mount: 700g
• Dimensions (shipping): 340 x 100 x 280mm (w x d x h)
• Weight (shipping): 1,300g
Mounting
• Desktop: Using stand supplied with product
• Wall: Using built-in wall mount features
