Advanced Search
Dell W-AP175DC Access Point Y7DVV
We apologize but this item is currently unavailable. Please feel free to browse our website for other available items.
Enlarge
Item Code:
NETPCDLWAP175DC
Manufacturer:
Model:
AP-175DC W-AP175DC
Part Number:
Y7DVV 0Y7DVV US-0Y7DVV
Model Name:
PowerConnect W-AP175DC
Item Description

Dell PowerConnect W-AP175DC Aruba AP-175DC Instant Outdoor Access Point Y7DVV 0Y7DVV US-0Y7DVV. The high-performance W-AP175 series delivers wire-like performance at data rates up to 300Mbps per radio and is available in three models: W-AP175P operating from standard 802.3at power-over-Ethernet (PoE+) source, W-AP175AC operating from 100 to 240 volt AC power source and W-AP175DC, operating from a 12 to 48 volt DC power supply. Both W-AP175AC and W-AP175DC powered models provide an 802.2af PoE power source on the Ethernet interface. The W-AP175 series features two 2x2 MIMO dual-band 2.4/5GHz radios with four antenna interfaces. Each radio is capable of providing maximum data rate of 300Mbps and a maximum transmit power of up to 25dBm. With wall and mast mounting options, the W-AP175 series is built to provide flexible mounting and deployment. Engineered to survive in harsh outdoor environments, the W-AP175 series withstands exposure to high and low temperatures, persistent moisture and precipitation, and is sealed for protection from airborne contaminants. Both power and Ethernet ports include surge protection. As an 802.11n AP, the W-AP175 series works with the complete portfolio of Dell Networking W-Series centralized Mobility Controllers and delivers speed and reliability comparable to a wired LAN. It also increases performance by utilizing techniques such channel bonding, block acknowledgement and MIMO radios. Advanced antenna technology also increases range and reliability. A key to ensuring wire-like performance and reliability is Adaptive Radio Management™ (ARM), which manages the 2.4 and 5GHz radio bands to deliver maximum client performance. ARM enables different 802.11 a, b,g and n wireless clients to operate on the same network at maximum possible performance through the use of band steering, airtime fairness policies between clients, and by managing channel interference that may occur between access points. The multifunction W-AP175 series can be configured through the Dell Networking Mobility Controller to provide wireless LAN access with part-time air monitoring, dedicated air monitoring for wireless IPS and spectrum analysis, Remote AP (RAP) functionality secure enterprise mesh.
 
Dell Part Number: Y7DVV 0Y7DVV US-0Y7DVV
Dell Model Number: PowerConnect W-AP175DC
Aruba Model Number: AP-175DC
 




 

Specifications

Operating mode
• Multiservice concurrent 802.11a/n + b/g/n
• WLAN spectrum monitor
• Air monitor, spectrum monitor
• Remote AP
• Secure enterprise mesh

Radios
• Multifunction, dual-radio, each radio capable of 2.4 and 5GHz operation
• Both 802.11n radios implement 2x2 MIMO with two spatial streams, providing up to 300Mbps data rate per radio
• Maximum ratio combining (MRC) for improved receiver performance
• Maximum transmit power per radio: 25dBm

Wireless radio specifications
• AP type: Dual-radio, dual-band 802.11n outdoor
• Supported frequency bands (country-specific restrictions apply):
- 2.400 to 2.4835GHz
- 5.150 to 5.250GHz with Dynamic Frequency Selection (DFS) capability
- 5.250 to 5.350GHz with DFS capability
- 5.470 to 5.725GHz with DFS capability
- 5.725 to 5.850GHz with DFS capability
• Available channels: Controller-managed, dependent upo
configured regulatory domain
• Maximum transmit power:
- 2.4GHz: Up to 25dBm (limited by local regulatory requirements)
- 5GHz: Up to 25dBm (limited by local regulatory requirements)
- Transmit power: Configurable in increments of 0.5dBm
• Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum
- 802.11a/g/n: Orthogonal frequency division multiplexing
- 802.11n: 2x2 MIMO with two spatial streams
• Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
• Association rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: MCS0 - MCS15 (6.5 to 300Mbps)
• 802.11n high-throughput (HT) support: HT 20/40
• 802.11n packet aggregation: A-MPDU, A-MSDU

Antenna
• Quad, N-type female interfaces (2x 2.4GHz, 2x 5GHz) for external antenna support (supports MIMO)

Interfaces
• 1 x 10/100/1000 BASE-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX
• 1 x USB console interface

Power
• W-AP175P: 48-volt DC 802.3at power over Ethernet (PoE+)
• W-AP175AC: 100–240 volt AC from external AC power source
• W-AP175DC: 12–48 volt DC from external DC power source
Maximum power consumption: 18 watts (excludes power
consumed by any PoE device connected to and powered by
the W-AP175AC or W-AP175DC)

Mounting
• Wall or mast mounted using the mounting bracket supplied
with the unit; solar shield included

Mechanical
• Dimensions/weight (unit)
- 60mm x 240mm x 105mm (10.2” x 9.4” x 4.1”)
- Weight (AP-175P): 3.5kg (7.7lb)
- Weight (AP-175AC): 4.25kg (9.4lb)

Environmental
• Operating:
- Temperature: –30o C to 55o C (–22o F to 131o F)
- Relative humidity: 5% to 95% non-condensing
- Altitude: Up to 3,000 meters (9,850 feet)
• Storage and transportation temperature range
–40o C to 70o C (–40o F to 158o F)
• Weather rating: IP66
• Wind survivability: Up to 165 mph
• Shock and vibration: ETSI 300-19-2-4 spec T41.E class 4M3
• Transportation: ISTA 2A





Please wait...
The request is currently being processed.
Please do not navigate to another page during this process.
Thank you for your patience.
Cancel request