Genuine Original Cisco Catalyst 6500 Series 9-Slot Network Router Switch Chassis Base Unit WS-C6509 800-04780-01. Cisco introduces the Cisco Catalyst 6500 Enhanced Series Chassis delivering up to 2 terabits per second of system bandwidth capacity and 80 Gbps of per-slot bandwidth. In a system configured for VSS, this translates to a system capacity of 4 Tbps. The Cisco Catalyst 6500 Enhanced Series Chassis will be capable of delivering up to 180 Gbps of per-slot bandwidth with a system capacity of up to 4 terabits per second. A system configured for VSS will be capable of delivering up to 8 Tbps of system bandwidth. The Catalyst 6509 switch is a 9-slot horizontal chassis supporting redundant power supplies, redundant supervisor engines, and slots for up to eight modules.
Cisco Model Name: Catalyst 6500 Series
Cisco Model Number: WS-C6509
Cisco Part Number: 800-04780-01
Compatible Part Numbers: 800-04920-02
Features:
| Chassis | Nine horizontal slots. Slots are numbered from 1 (top) to 9 (bottom). |
| Supervisor engines | Supports Supervisor Engine 2, Supervisor Engine 32, Supervisor Engine 32 PISA, Supervisor Engine 720, and Supervisor Engine 720-10GE.
Refer to your software release notes for the minimum software release versions required to support the supervisor engines.
– Supervisor Engine 2 must be installed in slot 1 and slot 2.
– Supervisor Engine 32, Supervisor Engine 32 PISA, Supervisor Engine 720, and Supervisor Engine 720-10GE must be installed in slot 5 and slot 6.
Slots not occupied by supervisor engines can be used for modules. Check your software release notes for any restrictions on the type of module that can be installed.
- Supervisor Engine 32, Supervisor Engine 32 PISA, Supervisor Engine 720, and Supervisor Engine 720-10GE require that the high-speed fan tray be installed in the chassis. You must also install a 2500 W or higher capacity power supply in the chassis to power the high-speed fan tray.
The 2500 W power supply, when supporting the high-speed fan tray, can be powered from either 120 VAC or 220 VAC.
- Supervisor Engine 720 and Supervisor Engine 720-10GE have a built-in switching fabric. Switch Fabric Modules (WS-C6500-SFM and WS-X6500-SFM2) are not supported by Supervisor Engine 720 and Supervisor Engine 720-10GE.
- Supervisor Engine 32 and Supervisor Engine 32 PISA do not support the Switch Fabric Modules (WS-C6500-SFM and WS-X6500-SFM2).
- The uplink ports are fully functional on all redundant supervisor engine models when they are in standby mode.
In systems with redundant supervisor engines, both supervisor engines must be the same model and have the same daughter card configurations. Each supervisor engine must have the resources to run the switch on its own, which means that all supervisor engine resources are duplicated. Identical supervisor engine memory configurations are recommended, but are not required as long as the supervisor engine with the smaller memory configuration is sufficient to run the configured features of the switch. Additionally, each supervisor engine must have its own flash device and console port connections. |
| Modules | Supports up to eight Catalyst 6500 series modules.
WS-C6500-SFM and WS-X6500-SFM2 Switch Fabric Modules must be installed in slot 5 or slot 6.
Mixing WS-C6500-SFM and WS-X6500-SFM2 Switch Fabric Modules in the Catalyst 6509 chassis is allowed.
Some Catalyst 6500 series modules may:
– Not be supported
– Require that you install a Supervisor Engine 720
– Have chassis slot restrictions
– Require a specific software release level to operate
Check your software release notes for specific information on modules supported and restrictions. |
| Clock and VTT modules | Two replaceable clock modules (WS-C6K-CL=) provide clocking signals to the EOBC channel and the switching bus.
Three replaceable voltage termination (VTT) modules (WS-C6K-VTT=) provide reference voltage for bus signals. |
| Fan tray | The chassis supports one hot-swappable fan tray. Two fan tray models are available:
– WS-C6K-9SLOT-FAN (Standard fan tray—340 CFM). Supports Supervisor Engine 1 and Supervisor Engine 2 only; does not support Supervisor Engine 32 or Supervisor Engine 720.
– WS-C6K-9SLOT-FAN2 (Optional high-speed fan tray—630 CFM). Required for Supervisor Engine 32 and Supervisor Engine 720. Supports Supervisor Engine 1 and Supervisor Engine 2.
You must install a 2500 W or higher capacity power supply in the chassis to power the high-speed fan tray. The 2500 W power supply can be powered from either 120 VAC or 220 VAC.
The fan tray contains nine individual fans. The individual fans are not field replaceable; you must replace the fan tray in the event of a fan failure.
Fan tray STATUS LED
– Red—One or more individual fans have failed.
– Green—Fan tray is operating normally. |
Specifications:
| Temperature, operating | Certified for operation: 32° to 104°F (0° to 40°C)
Designed and tested for operation: 32° to 131°F (0° to 55°C)
The Catalyst 6500 series switches are equipped with internal air temperature sensors that are triggered at 104°F (40°C) generating a minor alarm and at 131°F (55°C) generating a major alarm. |
| Temperature, non-operating and storage | Chassis unpackaged: –4° to 149°F (–20° to 65°C)
Chassis in protective shipping package: –40° to 158°F (–40° to 70°C) |
| Thermal transition | 0.5°C per minute (hot to cold)
0.33°C per minute (cold to hot) |
| Humidity (RH), ambient (noncondensing) operating | 5% to 90% |
| Humidity (RH), ambient (noncondensing) non-operating and storage | 5% to 95% |
| Dimensions (H x W x D) | 25.3 x 17.2 x 18.2 in. (64.0 x 43.7 x 46.0 cm).
Chassis depth including cable guide is 21.64 in. (55.0 cm).
Chassis requires 15 RU6.
The Catalyst 6509 switch chassis is designed to install in standard 19-inch equipment racks that meet ANSI/EIA 310-D, IEC 60297, and ETS 300-119 standards. |
